How do I configure my Wi-Fi mesh network

To configure your Mesh network please refer to the QIG provided in the box of your product.

CASE 1: Using the WPS Button

You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.

Wait for the configuration

Then, you must wait for a few minutes for the device to configure itself.

Second Mesh unit

You must plugin the second mesh unit.

LED

Press the WPS button for at least 4 seconds on the Mesh unit that is connected to your modem/router.
The LED will blink in blue after activating the WPS.

WPS second Mesh

Press the WPS button for at least 4 seconds on the second Mesh unit.

LED pairing

When the devices are being paired the LED is bliking in blue. please wait a few minutes for the pairing process to complete.
Once, the devices are paired, the LEDs are blue on both devices.

CASE 2: Using Ethernet Cable

You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.

Plug the second Mesh to the main Mesh

You must plug in the second mesh unit to turn it on and then connect it to the main mesh unit (LAN port) by using a RJ45 cable.

Second Mesh unit

Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are blue on both devices, they are configured.

How do I configure my Wi-Fi mesh network