How can I set up Universal Repeater 300 as an Access Point?

Please ensure that the Mode Selection switch on the side panel of your Universal Repeater 300 is set to Access Point mode.

Check the mode of the device

Check the switch on the left side of your repeater to see the functioning mode of your repeater. The switch must be set to router.

Reset your repeater to its factory settings

Reset your device to its factory settings by pressing the "Reset" button with a paper-clip for 6 seconds.

Connect your repeater to the modem

Connect your modem/router by an RJ45 Ethernet cable to the WAN/LAN port of the Universal Repeater 300.

Connect to the Wi-Fi

Connect your Wi-Fi device to one of the default Wi-Fi network (STRONG_2.4GHz) provided by Universal Repeater 300. There is no password for the default Wi-Fi network.

Browse to the Web UI

Type the following URL in your search bar: http://strong.ap300

Enter your credentials

Enter your password (admin) before clicking Login.

Wizard

Click Wizard in the bottom menu bar.

Set up the AP

Enter the Wi-Fi SSID and select its security type. Then, enter a Wi-Fi Password before clicking Apply.

We recommend using yhe WPA/WPA2 Mix .

Wait during the set up

The completion percentage of the configuration will be displayed on your screen. Please wait for the configuration to be completed.

Write down the information of the new Wi-Fi network. You will need it to connect to network after the configuation.

How can I set up Universal Repeater 300 as an Access Point?