Powerline 500 Kit EU | Configuring High Security Level 2

How to configure new powerline products with High Security Level 2 on your existing powerline network?

Please note that if you want to add more than one new powerline product, each product must be configured one after the other by following the same process. And not simultaneously. Typically, powerline adapters are paired by sets of two so if you need to add new powerline products to your network that is configured with high security level 2, you must follow the steps below.

Plug the new device in a socket

Plug the additional device(s) in a power socket.

Connect the new device to a router

Connect the device to an internet router/gateway by RJ45.

Press the pair button of an existing adapter

Press the “PAIR” button on one of the existing devices of the network for two seconds.

Press the pair button of the new adapter

Then, press the “PAIR” button of the new device for two seconds to add it to the network. You have up to two minutes to press the button.

The Home LED blinks

The home LED should start blinking in green on the devices.

The new adapter is paired

After adding the new device, the home LEDs should be green on both devices.

The encryiption key is set

Your new unique encryption key is set on the device you just configured.

Tags: