How do I configure my Wi-Fi mesh network (Case 1 : WPS Button)

To configure your Mesh network please refer to the QIG provided in the box of your product.

Plug in the device

You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to
your modem by using a RJ45 cable.

Wait during the configuration

Then, you must wait for a few minutes for the device to configure itself.

Plug in the second device

You must plug-in the second mesh unit.

Activate the WPS on the main mesh

Press the WPS button for at least 4 seconds on the Mesh unit that is connected to your modem/router.
The LED will blink in green after activating the WPS.

Activate the WPS on the second mesh

Press the WPS button for at least 4 seconds on the second Mesh unit.

Devices are pairing

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Culpa enim esse excepturi nemo nesciunt officia officiis optio.

How do I configure my Wi-Fi mesh network (Case 1 : WPS Button)