How do I create or modify the Wi-Fi password of my Mesh network?
1 Default Password location
The default Wi-Fi password is located under your device, however, if you already changed it, you may need to restore the Mesh AX 3000 to its default factory settings.
To do so please refer to the following section : How do I reset my Mesh units to the factory settings?
Once this is done, you can modify the Wi-Fi default password to your own personal password
1 Connect to the Wi-Fi of the device
2 Browse to the Web UI IP Address
3 Enter your credentials
You must enter the Username (admin) and Password (admin) (please note that after the first connection you will create your personal admin password which means that the password written on the product label will not work any more). Then, click Login.
4 WLAN 2.4G and 5G
Then, click WLAN in the top bar and go to 2.4G or 5G depending on which network type you are connected on. Then, go to Basic Settings.
5 Change password
Now, you can change the password in the WPA Passphrase section. You can check if your wrote the right one thanks to the little eye icon option.
6 Write it down
Write down the new password on a piece of paper and tape it to your device.
7 Save the modifications
Click Save & Apply.