Can I configure a Guest Network for my Mesh network? (Case 1: Web UI)
To access the Web UI, you must be connected to the Wi-Fi of your device after connection the RJ45 cable in the WLAN port of your device and of the internet box.
1 Connect to the Wi-Fi of the device
2 Browse to the Web UI IP Address
3 Enter your credentials
You must enter the Username (admin) and Password (admin) (please note that after the first connection you will create your personal admin password which means that the password written on the product label will not work any more). Then, click Login.
4 WLAN 2.4G and 5G
Then click WLAN in the top bar, go to the 2.4G or the 5G section depending on which network type you are on and then, click in Multiple SSID.
5 Multiple SSID set-up
Now, click on Enable for the new Guest Wi-Fi you want to add to the network, you can modify the SSID (Wi-Fi Network Name) and set-up a unique Password. You can also choose the Authentication type and hide the SSID if you want to.
6 Save the modifications
Click Save & Apply.
7 Check the new Wi-Fi Network
The new guest network is now visible in the Wi-Fi Network list of your devices.