How do I configure my Wi-Fi mesh network
CASE 1: Using the WPS Button
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.
Wait for the configuration
Then, you must wait for a few minutes for the device to configure itself.
Second Mesh unit
You must plugin the second mesh unit.
LED
Press the WPS button for at least 4 seconds on the Mesh unit that is connected to your modem/router.
The LED will blink in blue after activating the WPS.
WPS second Mesh
Press the WPS button for at least 4 seconds on the second Mesh unit.
LED pairing
When the devices are being paired the LED is bliking in blue. please wait a few minutes for the pairing process to complete.
Once, the devices are paired, the LEDs are blue on both devices.
CASE 2: Using Ethernet Cable
You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable.
Plug the second Mesh to the main Mesh
You must plug in the second mesh unit to turn it on and then connect it to the main mesh unit (LAN port) by using a RJ45 cable.
Second Mesh unit
Wait a few minutes for both mesh units to detect the Internet configuration. Once the LEDs are blue on both devices, they are configured.
