How to set up High Security Level 2 on your powerline products?

Put the adapters on a power strip

Take a power strip and plug all the powerline adapters on it.

Connect the adapters to the Internet

Connect one of the adapters to the internet gateway/router with a RJ45 cable.

Press the Connect & Secure button (first adapter)

Then, press the “CONNECT & SECURE” button for 3 seconds on the first device.

Press the Connect & Secure button (second adapter)

Then, press the “CONNECT & SECURE” button of the new device for three seconds to add it to the network. You have up to two minutes to press the button.

Home LED blinks

The home LED should start blinking in green on the devices.

Unique encryption key is set

Your unique encryption key is now set, and all the LEDs of the devices should be green.

Now, you must install the adapters in the rooms where you need them. We strongly recommend not to put the adapters on a power strip.

Tags:

How to set up High Security Level 2 on your powerline products?

1 Put the adapters on a power strip

2 Connect the adapters to the Internet

3 Press the Connect & Secure button (first adapter)

4 Press the Connect & Secure button (second adapter)

5 Home LED blinks

6 Unique encryption key is set

Menu