I do not have access to the Internet and/or the LED of the "home" icon does not light up.
Put the adapters on a power strip
Connect the adapters one after the other to a power strip.
Connect the adapters to the Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
Press the Connect & Seure button (first adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button located on the right side of the device for 10 seconds.
Press the Connect & Seure button (second adapter)
Press the “Connect & Secure” button located on the right side of the second device for 10 seconds.
Home LED blinks
The home icon LED should start blinking.
Adapters are reset
All the LEDs must be green at the end of the operations.
