I do not have access to the Internet and/or the LED of the "home" icon does not light up.
Plug the adapters on a power strip
Connect the adapters one after the other to a power strip.
Connect the adapters to the Internet
Connect each adapter to a working device (internet router/gateway, Android box, Smart TV, computer, etc.) with an Ethernet cable. There must be a communication between the devices otherwise the adapter will automatically go into standby mode.
Press the Connect & Secure button (first device)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
Press the Connect & Secure button (second device)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
Home LED blinks
The home LEDs should start blinking.
The adapter is reset
All the LEDs must be green at the end of the operations
