Home How to set up High Security Level 2 on your powerline products? 1 Plug the adapters on a multiplug Take a multiplug and plug all the powerline adapters on it. 2 Connect the adapters to the Internet Connect one of the powerline adapters to the internet gateway/router with a RJ45 cable. 3 Press the Connect & Secure button (first adapter) Then, press the “Connect & Secure” button for 2 seconds on the first device. 4 Press the Connect & Secure button ( second adapter) Press the” CONNECT & SECURE” button on the second device for 2 seconds. You have up to two minutes to do it. 5 Home LED blinks The home led should blink on the two devices. 6 New encryption key is set Your unique encryption key is now set, and all the LEDs of the devices should be green. Now, you must install the adapters in the rooms where you need them. We strongly recommend not to put the adapters on a multiplug. PrevPreviousHow to add a new strong powerline product to your existing powerline Wi-Fi network with High Security Level 1? NextHow to configure new powerline products with High Security Level 2 on your existing powerline Wi-Fi network?Next
