How to configure new powerline products with High Security Level 2 on your existing powerline network?

Please note that if you want to add more than one new powerline product, each product must be configured one after the other by following the same process. And not simultaneously. Typically, powerline adapters are paired by sets of two so if you need to add new powerline products to your network that is configured with high security level 2, you must follow the steps below.

Plug the new adapter in a socket

Plug the additional device(s) in a power socket.

Connect the adapter to the Internet

Connect the device to an internet router/gateway by RJ45.

Press the Connect & Securre button on an exisitng device

Press the “CONNECT & SECURE” button on one of the existing devices of the network for two seconds.

Press the Connect & Securre button on the new device

Then, press the “CONNECT & SECURE” button of the new device for two seconds to add it to the network. You have up to two minutes to press the button.

Home LED blinks

The home LED should start blinking in green on the devices.

LEDs are green

After adding the new device, the home LEDs should be green on both devices.

The new ecnryption key is set

Your new unique encryption key is set on the device you just configured

Tags:

How to configure new powerline products with High Security Level 2 on your existing powerline network?

1 Plug the new adapter in a socket

2 Connect the adapter to the Internet

3 Press the Connect & Securre button on an exisitng device

4 Press the Connect & Securre button on the new device

5 Home LED blinks

6 LEDs are green

7 The new ecnryption key is set

Menu