I do not have access to the Internet and/or the LED of the "home" icon does not light up.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below.
2 Connect the adapters to the Internet
3 Press the Connect & Secure button (first adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4 Press the Connecy & Secure button (second adapter)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds.
5 Home LED blinks
The home icon LEDs should start blinking.
6 Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 600 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.