I do not have access to the Internet and/or the LED of the "home" icon does not light up
You must reset the adapters to their factory settings. To reset the adapters, please follow the steps below.
2 Connect the adapters to the Internet
3 Press the PAIR button (first adapter)
Once the adapter is plugged in and connected to the Ethernet, simply press the “PAIR” button on the right side of the device for 10 seconds.
4 Press the PAIR button (second adapter)
Press the “PAIR” button located on the right side of the second device for 10 seconds.
5 Home LED blinks
The home LEDs should start blinking.
6 Adapters are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight Powerline 1000 on the same electrical installation.
After resetting all the devices, you can put them in the room where you need them.