I do not have access to the Internet and/or the LED of the "home" icon does not light up.
You must reset the adapters to their factory settings. To reset the adapters please follow the steps below:
2 Connect the adapters to Internet
3 Press the "Connect & Secure" button (first device)
Once the adapter is plugged in and connected to the Ethernet, simply press the “Connect & Secure” button on the front panel for 10 seconds.
4 Press the Connect & Secure button (second device)
Press the “Connect & Secure” button on the front panel of the second device for 10 seconds. You have up to two minutes to do it.
5 Home icon blinks on the devices
The home icon LED should start blinking.
6 Devices are reset
All the LEDs must be green at the end of the operations.
Repeat the same operation for a third powerline. You can have up to eight powerline 500 on the same electrical installation.
After pairing all the devices, you can put them in the room where you need them.