How do I configure my repeater as a router?
How do I configure my repeater as a router? TIPS: Before configuring your repeater, please check the following procedure to determine the location of your repeater: What is the best location for my repeater? 1 Connect to the Web UI Follow one of the procedures below to connect to the Web UI: How do I connect […]
What are the credentials to connect to the Web UI?
What are the credentials to connect to the Web UI? To connect to the Web UI, you only have to enter the administration password. The default administration password is admin. .
Which Wi-Fi frequencies (bands) does the repeater provide?
Which Wi-Fi frequencies (bands) does the repeater provide? The repeater is dual-band which means that it uses the 2.4G and 5G bands. In other words, after the configuration, the repeater will create two Wi-Fi networks.
Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router?
Will the MAC address-filtering settings configured on my modem/router be effective if I use the repeater to extend the Wi-Fi network of my modem/router? No. Wi-Fi devices that are connected to the repeater communicate to your modem/router by using the MAC addresses of the repeater.
How do I update the firmware of my repeater?
How do I update the firmware of my repeater? 1 Browse to the download section on https://www.strong-eu.com/ Before the update, you must go to the download section of our website to see if there is a new software version available. 2 Download To access the downloads, Click Assistance and Download in the top bar and […]
How do I reset my repeater to its factory settings? (Reset Button)
How do I reset my repeater to its factory settings? (Reset Button) Press the reset button located on the left side of the repeater until the LEDs are off. The device will turn back on automatically once it is reset.
How do I reset my repeater to its factory settings? (Web UI)
How do I reset my repeater to its factory settings? (Web UI) 1 Connect your repeater with a RJ45 cable You need to connect to the repeater by RJ45 or to connect to one of the Wi-Fi networks that was created after the configuration. 2 Browse to the Web UI URL Type the URL in […]
I configured my repeater as an extender, but my broadband internet speed is not improved, why?
I configured my repeater as an extender, but my broadband internet speed is not improved, why? Repeaters can improve the Wi-Fi coverage, performance and connectivity locally but the broadband Internet speed is defined by your subscription of your Internet Service Provider.
I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater,
I have a guest network on my modem/router. Can I extend my router’s network as well as the main Wi-Fi Network with the repeater, It is not possible to extend two Wi-Fi Network. You can extend either your Guest Network or your main Wi-Fi Network.
I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why?
I cannot find my existing Wi-Fi network in the installation wizard of the repeater, why? It is very likely that your repeater is too far from your modem/router. We recommend configuring your repeater in the same room as your modem/router and then changing its location to a different room.
