How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables?
How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables? 1 Main Mesh You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable. 2 Second Mesh unit […]
Can I connect my mesh nodes via the Ethernet cable?
Can I connect my mesh nodes via the Ethernet cable? Yes, it is possible to connect your Mesh nodes via a Ethernet cable (RJ45). Any device can be connected via RJ45 to any Mesh unit of your Mesh network.
How can I set/allocate a static IP address for my Atria Mesh 2100 unit?
How can I set/allocate a static IP address for my Atria Mesh 2100 unit? It can be interesting to set a static IP for you mesh controller to have an easier access to the Web UI on your network in the Atria Mesh app.You can also allocate dedicated IP Addresses to the devices connected on […]
What are the different ports used for ?
What are the different ports used for ? There are 5 ports behind your device: 1 Ports 12V1A : It is where you plug the power cable. Reset: Used to reset your device to its factory settings by inserting a paper clip in it. WPS: The WPS button is used to pair different devices together. […]
How can I have 2 different Wi-Fi Network with my Mesh?
How can I have 2 different Wi-Fi Network with my Mesh? You have different options to have several Wi-Fi Networks with your mesh units: You can set up your mesh unit as access points instead of mesh nodes. You can deactivate the band steering option of your device that creates a single Wi-Fi Network for […]
How can I identify the IP addresses of the different Mesh units of my Network?
How can I identify the IP addresses of the different Mesh units of my Network? To identify the IP addresses of the mesh units that are part of you network. 1 Atria Mesh App Download the application for smartphone “ATRIA MESH” on the App Store or the Google Play Store. 2 Connexion to the Wi-Fi […]
Can I configure a Guest Network for my Mesh network?
Can I configure a Guest Network for my Mesh network? Yes, you can configure a Guest Network for your Mesh network. There are 2 ways to do so : 1 CASE 1: Web UI: To connect to the Web UI, please refer to the following procedure: How do I access the Web UI? 2 Guest […]
How many Wi-Fi networks are provided with my Mesh unit?
How many Wi-Fi networks are provided with my Mesh unit? Your Mesh network only has one main Wi-Fi network once the mesh agents and controller are paired together.If you need to have additional Wi-Fi networks, you can configure Guest Wi-Fi networks.For the mesh 2100, you can configure two guest networks, one for the 2.4G band […]
I cannot access the internet after configuring my Mesh network, why?
I cannot access the internet after configuring my Mesh network, why? There are several reasons why you cannot access internet after configuring your Mesh Network: The RJ45 cable is not properly connected to the internet box or the main Mesh or in the wrong port. The internet connexion from the internet box is not working […]
How do I reset my Mesh units to the factory settings?
How do I reset my Mesh units to the factory settings? 1 CASE 1 : Reset Button To reset your device to its factory settings, please press the reset button with a paper clip for at least 10 seconds. 2 LED when reset done Then, you must wait for the LED to turn off and […]
