Where can I find the SSID (Wi-Fi Network Name) and Wi-Fi password of my Mesh Network?
Where can I find the SSID (Wi-Fi Network Name) and Wi-Fi password of my Mesh Network? 1 Find the information You can find the information of each Wi-Fi networks of the mesh units on the label located under the product.
How do I access the Web UI?
How do I access the Web UI? To access the Web UI, you must be connected to the Wi-Fi of your device after connection a Ethernet cable to the WLAN port of your internet box and in the WLAN port of the Mesh unit. 1 Connect to the Wi-Fi of the device To do so, […]
How do I create or modify the Wi-Fi password of my Mesh network?
How do I create or modify the Wi-Fi password of my Mesh network? 1 Default Password location The default Wi-Fi password is located under your device, however, if you already changed it, you may need to restore the Mesh AX 3000 to its default factory settings. To do so please refer to the following section […]
How do I update the administration password of the Web UI
How do I update the administration password of the Web UI You may need to change the password for the Web UI after your first connexion, to do so please do the following instructions. 1 Connect to the Wi-Fi of the device To do so, enter the SSID (Wi-Fi Network Name) and Wi-Fi password of […]
How do I update the administration password of the Web UI
How do I update the administration password of the Web UI You may need to change the password for the Web UI after your first connexion, to do so please do the following instructions. 1 Connect to the Wi-Fi of the device To do so, enter the SSID (Wi-Fi Network Name) and Wi-Fi password of […]
Can I configure a Guest Network for my Mesh network? (Case 2: Atria App)
Can I configure a Guest Network for my Mesh network? (Case 2: Atria App) To access the Web UI, you must be connected to the Wi-Fi of your device after connection the RJ45 cable in the WLAN port of your device and of the internet box. 1 Case 2: Atria App Download the application for […]
Can I connect my Mesh nodes via the Ethernet cable?
Can I connect my Mesh nodes via the Ethernet cable? Yes, it is possible to connect your Mesh nodes via an Ethernet cable (RJ45). Any device can be connected via RJ45 to any mesh unit of your Mesh network.
How can I set a static IP address or allocate a dedicated IP Address for my Atria Mesh AX3000 unit?
How can I set a static IP address or allocate a dedicated IP Address for my Atria Mesh AX3000 unit? It can be interesting to set a static IP for you mesh controller to have an easier access to the Web UI on your network in the Atria Mesh app.You can also allocate dedicated IP […]
What are the different ports used for?
What are the different ports used for? 1 Connect to the Wi-Fi of the device There are 7 ports behind your device: • 12V1A : It is where you plug the power cable.• ON/OFF: You can turn on or off your device by simply pressing this button.• RST: Used to reset your device to its […]
How can I have 2 different Wi-Fi Network with my Mesh?
How can I have 2 different Wi-Fi Network with my Mesh? You have different options to have several Wi-Fi Networks with your mesh units: • You can set up your mesh unit as access points instead of mesh nodes.• You can deactivate the band steering option of your device that creates a single Wi-Fi Network for […]