How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables?
How can I pair my mesh nodes if they are connected to my internet gateway via Ethernet cables? 1 Plug the mesh You must plug in the mesh unit to turn it on (there is no power button on the device) and connect it to your modem by using a RJ45 cable. 2 Plug the […]
Can I connect my mesh nodes via the Ethernet cable?
Can I connect my mesh nodes via the Ethernet cable? Yes, it is possible to connect your Mesh nodes via an Ethernet cable (RJ45). Any device can be connectedvia RJ45 to any Mesh unit of your Mesh network.
How can I set/allocate a static IP address for my Atria Mesh 1200 unit? (Web UI)
How can I set/allocate a static IP address for my Atria Mesh 1200 unit? (Web UI) 1 Connect to the Wi-Fi of your mesh To do so, connect to the Wi-Fi of your mesh network. 2 Browse to the Web UI Browse to the Web UI IP Address. 3 Access the Web UI Connect to […]
How can I set/allocate a static IP address for my Atria Mesh 1200 unit? (App)
How can I set/allocate a static IP address for my Atria Mesh 1200 unit? (App) It can be interesting to set a static IP for you mesh controller to have an easier access to the WebUI on your network in the Atria Mesh app.You can also allocate dedicated IP Addresses to the devices connected on […]
What are the different ports used for ?
What are the different ports used for ? There are 5 ports behind your device: 12V1A : It is where you plug the power cable. Reset: Used to reset your device to its factory settings by inserting a paper clip in it. WAN: The WAN port for a RJ45 cable to connect it to your […]
How can I have 2 different Wi-Fi Network with my Mesh?
How can I have 2 different Wi-Fi Network with my Mesh? You have different options to have several Wi-Fi Networks with your mesh units: You can set up your mesh unit as access points instead of mesh nodes. You can deactivate the band steering option of your device that creates a single Wi-Fi Network for […]
How can I identify the IP addresses of the different Mesh units of my Network? (App)
How can I identify the IP addresses of the different Mesh units of my Network? (App) 1 Connect to the Wi-Fi of the mesh Connect to the Wi-Fi of the main mesh unit. 2 Access the App Connect to the Atria Mesh app by entering the username and password. 3 My Network Click My Network. […]
How can I identify the IP addresses of the different Mesh units of my Network?
How can I identify the IP addresses of the different Mesh units of my Network? (Web UI) 1 Connect to the Wi-Fi of the mesh Connect to the Wi-Fi of the main mesh unit. 2 Browse to the Web UI IP Address Then, you must browse to the Web UI IP address 3 Easy mesh […]
Can I configure a Guest Network for my Mesh network? (Case 2: App)
Can I configure a Guest Network for my Mesh network? (Case 2: App) Yes, you can configure a Guest Network for your Mesh network. 1 Access the App To connect to the App, please refer to the following procedure: How do I use the Atria Mesh App? 2 Guest Wi-Fi Click Guest Wi-Fi. 3 Activate […]
Can I configure a Guest Network for my Mesh network? (CASE 1: Web UI)
Can I configure a Guest Network for my Mesh network? (Case 1: Web UI) Yes, you can configure a Guest Network for your Mesh network. 1 Access the Web UI To connect to the Web UI, please refer to the following procedure: How do I access the Web UI? 2 Wi-Fi Settings Click Wi-Fi in […]